Frete Grátis em todos os produtos
### Descrição do Produto
O MOTOPOWER MP00207 é um carregador de bateria inteligente e mantenedor, projetado para atender a todas as suas necessidades de carregamento de baterias de chumbo-ácido de 6V e 12V. Este dispositivo versátil é compatível com diversos tipos de baterias, incluindo as convencionais inundadas (wet), as de manutenção livre ativadas de fábrica (MF/FA), as de vidro absorvente (AGM) e as de gel (gel electrolyte). Com uma tensão de entrada de 100-120V AC, o MOTOPOWER MP00207 é a solução ideal para quem busca eficiência e praticidade.
O carregador é totalmente automático, com detecção de tensão que identifica se a bateria é de 6V ou 12V. Ele possui um sistema de detecção de bateria descarregada e um aviso correspondente, permitindo que você simplesmente conecte e inicie o processo de carregamento e manutenção. O programa controlado por microprocessador monitora todo o progresso do carregamento e interrompe automaticamente quando a bateria está totalmente carregada. Após isso, ele mantém a bateria com uma corrente de flutuação, garantindo que a carga se mantenha estável.
Com 7 estágios de carregamento, incluindo Diagnóstico, Soft Start, Carga Bulk, Absorção, Flutuação, Manutenção e Recuperação, o MOTOPOWER MP00207 se destaca pela sua versatilidade. Você pode selecionar duas taxas de carga (2Amp ou 4Amp) para baterias de 12V com diferentes capacidades, enquanto a taxa de 2Amp é ideal para baterias de 6V. O modo de reparo é especialmente útil para baterias sulfatas, permitindo que você prolongue a vida útil do seu equipamento.
A segurança é uma prioridade com o MOTOPOWER MP00207. A tecnologia micro avançada garante proteção contra sobrecarga, curto-circuito e polaridade reversa, além de contar com tecnologia livre de faíscas. As luzes LED de fácil leitura indicam quando o dispositivo está ligado, se está no modo de 6V ou 12V, a taxa de carga de 2Amp ou 4Amp e o status de carga da bateria. O carregador também inclui terminais de desconexão rápida SAE e cabos tipo jacaré, facilitando o uso.
### Instruções de Uso:
1. Conexão: Conecte o carregador à tomada de 100-120V AC.
2. Seleção de Modo: Escolha o modo de 6V ou 12V conforme a bateria que você está utilizando.
3. Taxa de Carga: Selecione a taxa de carga desejada (2Amp ou 4Amp) de acordo com a capacidade da bateria.
4. Conexão à Bateria: Utilize os terminais SAE ou os cabos tipo jacaré para conectar o carregador à bateria.
5. Monitoramento: Acompanhe as luzes LED para verificar o status do carregamento. O carregador interromperá automaticamente quando a bateria estiver totalmente carregada.
### Características do Produto
– Compatibilidade: Carregador para baterias de 6V e 12V, incluindo tipos convencionais, AGM, MF/FA e Gel.
– Detecção Automática: Identificação automática da tensão da bateria.
– Microprocessador Controlado: Monitora o progresso do carregamento e interrompe quando a carga está completa.
– 7 Estágios de Carregamento: Inclui modos de Diagnóstico, Soft Start, Carga Bulk, Absorção, Flutuação, Manutenção e Recuperação.
– Taxas de Carga Ajustáveis: Opções de 2Amp e 4Amp para diferentes capacidades de bateria.
– Segurança Avançada: Proteção contra sobrecarga, curto-circuito e polaridade reversa.
– Indicação LED: Luzes LED que mostram o status do carregamento e a taxa de carga.
– Conexão Rápida: Terminais SAE e cabos tipo jacaré para fácil manuseio.
### Perguntas Frequentes (FAQ)
Pergunta: O MOTOPOWER MP00207 pode ser usado para carregar baterias de motocicletas?
Resposta: Sim, o MOTOPOWER MP00207 é ideal para carregar baterias de motocicletas, pois é compatível com baterias de 6V e 12V.
Pergunta: O que fazer se a bateria não carregar?
Resposta: Verifique as conexões e certifique-se de que o carregador está configurado corretamente para a tensão da bateria. Se a bateria estiver muito sulfatada, utilize o modo de reparo.
Pergunta: O carregador pode ser deixado conectado por longos períodos?
Resposta: Sim, o MOTOPOWER MP00207 possui um modo de flutuação que mantém a bateria carregada sem sobrecarregá-la, tornando seguro deixá-lo conectado.
Pergunta: Qual é a diferença entre as taxas de carga de 2Amp e 4Amp?
Resposta: A taxa de 2Amp é recomendada para baterias menores ou mais antigas, enquanto a taxa de 4Amp é adequada para baterias de maior capacidade.
Pergunta: O carregador é seguro para uso em ambientes externos?
Resposta: O MOTOPOWER MP00207 é projetado para uso interno. Para ambientes externos, recomenda-se protegê-lo da umidade e intempéries.
Ann-Marie Williams –
Perfect! Works great for me! No complaints!
Dave in Texarkana –
The form factor is small, say about 3 inches wide by 8 inches long. It always defaults to ‘motorcycle’, I assume lower amps, but all the indicators and selectors work well. I use it to maintain a battery on a car infrequently driven and it has done that well for about 6 weeks. I just bought, and received, another one of the same today to put on a generator battery to keep charged. I assume it will work as well on that – will leave on ‘motorcycle’ 12V (it auto-senses the correct voltage).
Rob D Ingham –
Looks good arrived very quickly ( 3days ) I have not used it yet.
Ahmed Mohsen –
Very bad product not advisable at all
j p t –
I like that this automatic battery charger/maintainer (mod: MP00207) is clearly labeled on the box for each battery type it is suited for. It would have been nice if it were also labled directly on the charger, so there’s no question when the box is lost. It allows you to choose either a 2 AMP or 4 AMP charging rate. As a test, I chose to bring an automotive EFB from nominal 12.5 volts to a float state of 13.3 volts. Using the 2 AMP setting, it took about 8 hrs achieve maintenance. The charger ran cooler than my older automatic during the bulk charge, and felt only slightly warm on the float charge, which gives me the confidence to leave this charger hooked up over winter storage. Although I didn’t try the restoration cycle, it’s a nice feature to have available if one of your batteries has been discharged. All in all, this is very nice value.
Ridin Red –
This charger works when running but very often just shuts completely down and quits working. If you catch it and restart it , it will work again but if you don’t notice it, your equipment’s battery discharges. I wouldn’t recommend this product as it can leave you with a dead battery.
Typhoon –
Summary: I purchased this MOTOPOWER MP00207 Automatic Smart Battery Charger as a battery maintainer and repair function for Lead Acid batteries (both SLA and AGM). The charger gives a 2 amp charge function for 6 volt batteries and 2 amp or 4 amp charge function for 12 volt batteries. Controls and battery function on this charger are very basic and don’t give much information on how the charger is working. Doing charging tests on AGM 9.0 AH batteries for Uninterruptible Power Supplies comparing different smart chargers from Amazon indicate to me that this charger is on the low end of the performance spectrum. My opinion, based on testing six different smart chargers in the same, or lower price range, is that the MOTOPOWER MP00207 is an underperformer. If you need a basic battery charger that seems to be more water resistant for more outdoor/weather exposed use, this charger has potential utility. At temperatures below 32 F. (0 C.) the cables become stiff so take that into account. At the time of this review, I have only owned the charger less than a week so, I cannot speak to the long-term durability of this unit. This charger would not be my choice if I could only buy one smart charger.
Pros:
– Relatively Low Cost.
– 6 Volt and 12 Volt charging capability.
– Automatic Detection of 6 Volt or 12 Volt Battery voltage.
– No fan or openings into the unit (water resistant?).
– LED Lights and pressure mode switch give fewer things to break over time.
– 2 Amp and 4 Amp charging capability for 12 volt systems for versatility.
Cons:
– No indication that this Smart Battery Charger has De-Sulfonation, Pulse Charging, Ramped Voltage charging functions that are common in other Smart Battery Chargers of the same price range.
– Charging rate is slower than for other chargers of the same amperage range.
– Battery no-load voltage is lower when the MOTOPOWER charger indicates battery is full than for other Smart Battery Chargers tested.
– Indicator/Mode lights are very basic. This is somewhat disappointing if you want more information on what is going on with your charger.
– No Temperature monitoring to prevent overcharging at elevated temperatures.
I tested six different Smart Battery chargers I purchased on Amazon for less than US$30 each (I did test a NOCON Genius 1 that was priced at $39.99). I was mainly interested in getting the battery de-sulfation, battery repair, and battery maintainer function. Units I tested had amperage supply from 1 AMP to 10 AMP. I wanted the ability to at least work with 12 Volt batteries. Units working 6 Volt batteries would be a plus. 6 V, 12 V, and 24 V functionality would be fantastic. Unfortunately, no smart charger in that price range worked with all 3 voltages.
The MOTOPOWER MP00207 seemed to be a fairly solid unit. It has decent heft with a solid feel. The external housing is all plastic (not a disadvantage for electrical equipment). The unit seems to be sealed to be water resistant. There is no indication of IPTX water resistance nor any rating so there is no warranty about that. Other Smart Battery chargers with fans are not water resistant so that may be a plus if it is a big concern for you.
Instructions indicate that you need to hold the mode button for 3 seconds to get the 4 Amp charging on 12 volt batteries. If you don’t read the instructions, it was not clear. Default charging mode is 2 Amps. 6 Volt batteries can only be charged at 2 Amps. There is no indiction that the charger switches back to the default 2 Amp mode after the battery is “full” and the charger is in “maintenance” mode.
Measuring the time to charge a new 12 Volt, 9 AH AGM UPS battery from 12.5 Volts to 13.2 Volts (no-load voltage) indicates that the MOTOPOWER MP00207 can take days (at 9 C.). There is also no temperature monitoring feature that adjusts adjusts charger voltage/amperage to optimize charging rate. Other Smart Chargers in this price range have this feature.
Bottom Line: The MOTOPOWER MP00207 charger seems to be of reasonably good construction quality. It appears to be sealed to provide some water resistance that other smart chargers do not have. The control/status features are very basic and provide little information. Finally, the charging rate is slower than other comparably priced smart chargers. My opinion is that this charger would not be my choice if I could only buy one Smart Battery Charger.
Jack –
I beat the junior to death ,in outdoor covered yard use in florida. It is worth the money ,so I replaced it with the elite model and bought another junior tender also . Both were simple to use in all modes even recovery was no worries ,and the tender was decent it goes red and bliks green etc then after,you start your vehicle even hooked up then shut off it showed solid green ,so yea im stoked on these . My battery was below 4 v,now it’s up full 14.2-13.8 range
Wayne A. –
Works great and comes with extra plugs to leave on multiple batteries and just move the chargers as needed
Mike –
I bought this to try and save the totally dead AGM battery on my atv. After following the instructions, I used the battery reconditioning mode , and then once the cycle was over, let it continue to trickle charge overnight. In the morning I put the battery back in the ATV and it fired right up!
This also comes with battery leads that allow you to easily plug into the maintainer without removing the battery.
I highly recommend it