Descrição do Produto: Sensor de Oxigênio 234-9002
O Sensor de Oxigênio 234-9002 é a solução ideal para quem busca otimizar o desempenho do motor de veículos como o 4Runner (1999-2002) e Tacoma (2000-2003). Este sensor de ar/combustível, projetado para motores 2.7L e 3.4L-V6, bem como 2.4L e 2.7L-L4, é um componente essencial que melhora a economia de combustível e reduz as emissões, contribuindo para um ambiente mais limpo e sustentável.
- Melhora a economia de combustível e reduz emissões.
- Garantia: 2 anos; Tipo: 4 fios; Totalmente testado.
- Construído com material de alta qualidade.
- Fácil de instalar, resposta rápida, desempenho estável, próximo ao efeito original.
- Entre em contato conosco se tiver dúvidas antes da compra. Responderemos o mais rápido possível para ajudá-lo a adquirir o produto certo.
Este sensor é fabricado com materiais de alta qualidade, garantindo durabilidade e resistência em condições adversas. A instalação é simples e rápida, permitindo que você retome a performance ideal do seu veículo sem complicações. Com um tempo de resposta ágil e desempenho estável, o Sensor de Oxigênio 234-9002 se aproxima da eficácia dos sensores originais, proporcionando uma experiência de condução superior.
- Instruções de Uso:
Para instalar o Sensor de Oxigênio 234-9002, siga os passos abaixo:
1. Desconecte a bateria do veículo para evitar qualquer curto-circuito.
2. Localize o sensor de oxigênio no sistema de escape do seu veículo.
3. Remova o sensor antigo, utilizando uma chave de soquete apropriada.
4. Instale o novo sensor, certificando-se de que os fios estejam conectados corretamente.
5. Reconecte a bateria e ligue o motor para verificar se o sensor está funcionando corretamente.
Características do Produto:
– Tipo: Sensor de Oxigênio 4 fios
– Compatibilidade: 4Runner (1999-2002), Tacoma (2000-2003)
– Motores Compatíveis: 2.7L e 3.4L-V6, 2.4L e 2.7L-L4
– Garantia: 2 anos
– Material: Alta qualidade, resistente a altas temperaturas
– Desempenho: Resposta rápida e estável, próximo ao efeito original
– Instalação: Fácil e rápida, sem necessidade de ferramentas especiais
Perguntas Frequentes (FAQ):
Pergunta: O Sensor de Oxigênio 234-9002 é compatível com meu veículo?
Resposta: Este sensor é compatível com 4Runner (1999-2002) e Tacoma (2000-2003) com motores 2.7L, 3.4L-V6, 2.4L e 2.7L-L4.
Pergunta: Qual é a garantia deste produto?
Resposta: O Sensor de Oxigênio 234-9002 vem com uma garantia de 2 anos, garantindo sua qualidade e durabilidade.
Pergunta: É difícil instalar o sensor?
Resposta: Não, a instalação é fácil e rápida, podendo ser realizada com ferramentas básicas. Siga as instruções de uso para um procedimento seguro.
Pergunta: O que fazer se eu tiver dúvidas antes da compra?
Resposta: Sinta-se à vontade para entrar em contato conosco. Estamos disponíveis para responder suas perguntas e ajudá-lo a escolher o produto certo.
Pergunta: Como o sensor melhora a economia de combustível?
Resposta: O Sensor de Oxigênio monitora a mistura de ar e combustível, ajustando-a para uma combustão mais eficiente, o que resulta em melhor economia de combustível e menores emissões.
allgoo19 –
Forget about passing the smog check, this sensor will stop your car from working.
It is supposed to be compatible to Denso 234-9001 air fuel ratio senor, it’s not
Before this, I installed a Denso 234-2062 O2 sensor which was recommended in Denso web site, which I found later that are not replacement of 234-9001.
The O2 sensor didn’t make the the truck(2000 Tacoma 2.4l) smog check test ready but at least it didn’t interfere the function of the truck.
This sensor, Germban made my truck engine started knocking in less than a mile of driving.
I had to stop on the street and pulled to the nearest shop I knew and left it there over night.
The price difference of this and Denso(OEM) is about $50, but will cost you about $400 more at the shop.
Kristiné D –
The product looked to be of good quality. Aside from large hex nut being loose (perhaps to accommodate other configurations) it looked fine and assembled well enough. After installed, the 2002 4Runner had pulsing / hesitation in acceleration. This may be fine for grandma but it was not like the Denso product the I replaced it with. I was hoping to save $70 but in the end I had to install two parts learning a lesson here.
Diana G. Buckley –
My husband is the mechanic. He shopped for a replacement Air Fuel / O2 sensor for his 2000 Toyota Tacoma 3.4L V6 automatic rear wheel drive California emissions daily driver when the factory original gave out at 162,000 miles with a P1135 and P1130 code. This one is the perfect fit cross-referenced from the Toyota part number…and it is 1/3 the $$$ cost from the local retail auto parts stores. It works exactly as if it were original equipment. Perfect fit in every respect, physically and electronically. Now for the rest of the story….this item comes in generic packaging with the imprinted part number obscured by a piece of aluminum tape. There are no additional supporting parts in the box, no replacement gasket, no replacement self-locking nuts, no little tube of anti-seize compound to aid the reassembly….nothing. So plan to spend a little extra time at the local Toyota dealer to buy those things and all will be fine. OBTW, use PLENTY of penetrating oil to ensure a safe removal of the original nuts otherwise you WILL damage the threads trying to remove the sensor.
James Griffie –
This worked great on my 2002 Toyota Tacoma 3.4L V6 with CAL emissions. I had the P0171 code (system too lean bank 1) and this sensor corrected it. I have driven almost 80 miles and all good so far. I ordered a different one (same part number) that did not mention the CAL emissions and it did not work. Truck is running really well now!
Client d’Amazon –
bon
Amazon Customer –
Works perfectly in my 2001 Toyota Tacoma 4dr. Automatic! Yes, it’s the #1/upstream O2 sensor/air-fuel ratio meter.
Placeholder –
Easy to install of my four runner
David D Meshirer –
Works great, but the original was good. Check your ground wires.
Josh ayling –
2001 tacoma 3.4 auto would not work properly tried 2 times and made my throttle pulsate in drive and park.
Mike –
2000 4Runner SR5, took about 20 minutes to install once I realized to come at it from the top by removing the gear shift. He h engine light has stayed off and gas mileage seems a bit better. Mechanic was quoting me $380 to do it.