Frete Grátis em todos os produtos
### Descrição do Produto
Apresentamos o Novo Conjunto Completo de Cilindro de Ignição, Fechadura de Porta e Chave Transponder para Honda Accord 2006-2007. Este produto é a solução ideal para quem busca segurança e funcionalidade em um único pacote. O conjunto inclui chaves equipadas com um chip transponder 8E, garantindo que seu veículo esteja protegido contra tentativas de roubo e acesso não autorizado. Com um design que se encaixa perfeitamente nos modelos Honda Accord de 2006 a 2007, este conjunto é uma escolha prática e eficiente para a substituição de componentes de ignição e fechadura.
As dimensões do pacote são de 8.07 x 4.57 x 4.29 polegadas, tornando-o compacto e fácil de armazenar até o momento da instalação. Fabricado nos Estados Unidos, este produto atende aos mais altos padrões de qualidade e durabilidade, assegurando que você tenha um desempenho confiável por muitos anos.
### Instruções de Uso:
Para utilizar o Novo Conjunto Completo de Cilindro de Ignição, Fechadura de Porta e Chave Transponder, siga os passos abaixo:
1. Remoção do Antigo Cilindro: Utilize uma chave de fenda para remover o painel de acesso ao cilindro de ignição. Desconecte os fios e retire o cilindro antigo.
2. Instalação do Novo Cilindro: Insira o novo cilindro de ignição no lugar do antigo, conectando os fios conforme necessário.
3. Programação da Chave: Para programar a chave com chip transponder 8E, siga as instruções do manual do veículo ou consulte um profissional qualificado.
4. Teste de Funcionamento: Após a instalação, teste a ignição e as fechaduras das portas para garantir que tudo esteja funcionando corretamente.
### Características do Produto
– Chaves com Chip Transponder 8E: Proporciona segurança adicional ao seu veículo, evitando cópias não autorizadas.
– Compatibilidade: Projetado especificamente para Honda Accord 2006-2007, garantindo um encaixe perfeito e funcionalidade ideal.
– Dimensões do Pacote: 8.07 x 4.57 x 4.29 polegadas, facilitando o transporte e armazenamento.
– Origem: Fabricado nos EUA, assegurando qualidade e durabilidade superiores.
– Instalação Simples: O design intuitivo permite uma instalação rápida e fácil, mesmo para aqueles com conhecimentos básicos de mecânica.
### Perguntas Frequentes (FAQ)
Pergunta: Este conjunto é compatível com outros modelos de Honda?
Resposta: Não, este conjunto é especificamente projetado para os modelos Honda Accord de 2006 a 2007.
Pergunta: Posso programar a chave em casa?
Resposta: Sim, a programação da chave pode ser feita em casa seguindo as instruções do manual do veículo, mas recomenda-se consultar um profissional se você não se sentir confortável.
Pergunta: O que fazer se a chave não funcionar após a instalação?
Resposta: Verifique se o cilindro de ignição foi instalado corretamente e se a chave foi programada corretamente. Se o problema persistir, consulte um mecânico qualificado.
Pergunta: O produto vem com garantia?
Resposta: Sim, o conjunto geralmente vem com uma garantia limitada, mas é importante verificar os termos específicos no momento da compra.
Pergunta: É necessário algum equipamento especial para a instalação?
Resposta: Não, ferramentas básicas como chaves de fenda e alicates são suficientes para a instalação deste conjunto.
Donavan Ursua –
Ignition and locks were fine. Keys would not program. Had to take chip out of old keys to program.
Micah –
Original ignition locked up at 215,000 miles on my 2006 Honda accord. Hotwired in someone’s front yard to get it home before ordering this. Extensive kit for the money. Had to swap the chip out of my old fab for the immobilizer to work properly. Haven’t gotten around to the door locks but the ignition is identical to factory. Feels well built and relatively easy to install once the old on is out. Break off bolts are a pain to get out. All necessary hardware included. Would buy again.
Dakota Hughey –
I was able to change my key internals to make it work but the key fob part is wrong and won’t program and I had to change my immobilizer and the chip inside the key for it to work. If you’re mechanically inclined this is an ok option for the price but not plug and play.
jdc61 –
This part is correct for a 2007 Honda Accord . There a 2 important steps that must be done to have a successful installation. The car has 3 wire harnesses and the part has only 2 places to plug them in so the black part that has a round hole that surrounds where the key goes in and has 3 plug receptacles that was used on the original Ignition must be used and replace the one that comes on your new ignition . It is held on with I believe 5 smalls screws and has one wire plug (remove by pushing a little nub on one side). Now you can plug in all 3 wire plugs. By switching this part you also have brought over the security system from your old car so no difficult key coding will be needed. The next important step is to take the ENTIRE insides out of your old key and put them in one of your new keys. You MUST put both the box that holds the battery and the transponder which is on the side of the inside of your old key.I f you forget to put your original transponder your new key will not work and need to be programed. This is a very important set if you like a simple job.Once you put ALL the parts that were in your old key into a new key your car will start and you can use it to program the spare key by turning on (without starting) the ignition 4 times with your key( that has the internals of your original key) each time you turn the key press the center lock button each time when the key is in the on position. You turn the key off after each time. The 4th time you do this you will hear the locks lock and you take your spare key and press the same lock button once. This should program your spare key. If it does not work there is a good video on You Tube called How to PROGRAM your KEY REMOTE for FREE. I hope this helps make what can be a difficult job easy and way cheaper than a shop.
kendrick –
My original comment: ‘This delivery took over one month from order to receipt. Also, the product quality when received was quite poor. The auto mechanic had some problems fitting and the key in barrel action is very ‘scratchy”.
I will now say that the product quality is close to the worst that I have ever received. The two supplied keys both fell apart through seriously poor plastic quality within a few weeks of being fitted. I’m now having real problems trying to start my car. Very GIB BAD for your supplier Amazon 🙁 🙁
Amazon Customer –
Worked but still had to have dealer program key
Donavan Ursua –
Super easy to install.
Save yourself hundreds of dollars and do it yourself. Waaaaay worth it. Keys feel solid and feel great turning the ignition on.
A lot of the reviews I read said they had trouble with “programming key”.
All you do is remove the immobilizer from your old ignition assembly (2 small screws) and swap to new one.
Take the guts and chip from your old key fob and put them in the new supplied keys.
Super easy.
Hardest parts:
Removing plastic covers and tamper proof bolts.
You’ll need a hammer and chisel to take the tamper proof bolts off easily.
Hope this helps future buyers.
elvy –
This was labeled for use on 2007 honda accord, but is incompatible with mine. Now my ignition doesnt work, my old keyfobs are useless and the obd scanner tells me that my immobilizer is not functioning all after I had this ignition installed. My Honda Accord is rendered completely undriveable all thanks to Amazon, by telling me that this part worked on my vehicle. Oh and it’s not returnable either, because it’s out of the 30 day window. Update: My husband continued to work with this ignition and finally got it to work on our Honda accord exl v6 after replacing multiple relays and finally tapping the starter with a hammer. So, I guess it will work for the price.
malene –
This worked perfect for my 2006 Honda accord.
I was having to start twisting my key harder and harder to get my car started. After doing some internet searching I decided to buy this.
My husband is a very handy person and with you tube he easily took apart the steering wheel column and got it replaced.
The keys were a little tricky as we ended up removing all of the guts from my old key fobs and fitting it in the new ones. The only downfall with this is that the new keys don’t have the red panic button. I’ve owned the car car for 12 years and never once used that button so it wasn’t really much of an issue for me.
We had no issues programming it to my car. We followed the directions and it worked the first try.
This is my daily driver car and I’ve been using this for many months with no problems at all.
Tony in OZ –
The media could not be loaded.
It just wastage of time I ordered it for the replacement of old one because that ignition is failed to turn keys. And amazon give me the worst thing ever it wastes my 2 days of waiting